Waterborne Polyurethane Emulsion FH-3120W

Waterborne Polyurethane Emulsion FH-3120W

Production of bio based polymer materials and fine chemicals

FH-3120W is a bio-based polyol resin emulsion obtained through a special emulsification process. It is compatible with a dedicated waterborne isocyanate curing agent and can be used to formulate two-component primer or intermediate coatings that cure at room temperature.

Still deciding? Get samples first,  Contact US !

View similar products

Tag list

INERT GAS GENERATOR, FLETTNER ROTOR.

Products Detail

FH-3120W A bio-based polyol resin emulsion obtained through a special emulsification process, Adaptation Dedicated Water-based Isocyanate Hardener It can be used to produce two-component primer or intermediate coats that cure at room temperature. This product contains no solvents whatsoever and has extremely low odor in the container. The resulting coating film dries rapidly, exhibits high crosslinking density, demonstrates strong adhesion to various substrates, develops early hardness quickly, and allows for a short interval between application and subsequent polyurethane topcoats. It also boasts excellent tolerance and is particularly well-suited for industrial production-line painting.

Appearance 

White emulsion 

Solid content %

45~50 

Viscosity mPa.s/25 Celsius 

50–300 

pH Value 

6-7 

Hydroxyl content % (Solid form) 

About 3.3

Emulsion bio-based content 

Greater than 60%

Formula Notes: 
A: The formulation does not use amine (alkali)-based flash rust inhibitors to avoid catalyzing reactions and shortening the pot life. 
B: The formulation recommends adding a certain amount of corrosion inhibitor, which, in synergy with rust-preventive pigments, enhances the protective effect. 
         Packaging and Storage: 
The standard packaging specifications are 25 kg or 200 kg opaque plastic drums; custom packaging requirements are available upon request.

Instructions:

1. During construction, you can first pre-dilute Component B with water at a ratio of 1:0.5, stir thoroughly, and then add it to Component A. After mixing evenly, you can proceed with construction.

Waterborne Polyurethane Emulsion FH-3120W

FH-3120W is a bio-based polyol resin emulsion obtained through a special emulsification process. It is compatible with a dedicated waterborne isocyanate curing agent and can be used to formulate two-component primer or intermediate coatings that cure at room temperature.

Production of bio based polymer materials and fine chemicals

Products Category

Tag list

Inquire Now

Note: Please leave your email address, our professionals will contact you as soon as possible!